This information is provided for your convenience. It is not meant to supersede
any instructions provided by the equipment manufacturer or your pool builder. Pool Emporium, Inc. assumes no liabilities.
The Langlier Saturation Index, while not created specifically for swimming pools, is still the most
widely used measurement for the overall balance of pool water. Water is considered at a perfect balance when the
saturation index is 0. Too far on the plus side, and the water is said to be saturated or scale forming. Too far
on the negative side, and the water is said to be aggressive or corrosive.
It is true that you can achieve results that are within tolerance, while your individual readings are outside
the normal recommended parameters (see our suggested balance levels). However, Pool Emporium,
Inc. does not recommend that method of balancing your water unless you have no other alternative (if it is illegal
to drain large volumes of water in your area, or you have extremely poor fill water). This calculator only works
in Internet Explorer. Netscape users click here. Enter the 5 parameters below and click the
calculate button. If you don't use either browser, or prefer to see the actual index chart and how the calculations
are performed, click here.
Pool Emporium, Inc. Saturation Index Calculator for Internet Explorer
Total Dissolved Solids
General State of Pool: